AC110V/220V SMD3014 120LEDS/M LED Flexible Tape Light 1 YEARS WARRANTY

Attention Please:

1. Each light strip is connected to a rectifier bridge stack and plug, which can be easily used by simply plugging the plug into a power outlet. Please confirm the product power before use, ensure that the power supply line is not overloaded, and the circuit has a circuit protector, such as a power outlet with a fuse or a leakage switch. Please refer to the product technology and photoelectric parameters for use to ensure that it works within ±5% of the voltage parameters.

2. If you want a custom length, you should cut it at the 0.5/1 meter unit weld position, not less than the minimum unit length or cut within the unit group. After cutting, it should be noted that the incision should be sealed with waterproof insulating glue to avoid burning the product or causing a safety accident (the damage caused by the product supplier is not responsible). We do not recommend that you cut the length yourself. If you need non-standard length products, please contact our marketing staff.

3. Do not twist the lamp strip continuously. If it is twisted many times, it will cause fatigue damage to the internal power line. The twist angle is not less than 45 degrees. Do not bend in the arc below 60mm in diameter. Soft lights should be used for outdoor and indoor use to prevent fire, electric shock and personal injury.

4. For the stable work of this product, please use the product in some places with good ventilation. It is forbidden to roll the entire light strip together.

5. In order to ensure the life of the lamp strip, it is recommended that the power cord should not be pulled hard during use, and it is forbidden to collide and force the surface of the lamp bead. The light bar must be installed and fixed firmly, and there must be no fluttering or swinging. Otherwise, the light bar wire is fatigued and broken, and the lamp strip is damaged;

6. The tail end of the light bar must be covered with a tail plug; when used outdoors, each interface must be firm and free of short-circuit hidden dangers. When installing outdoors, the interface must be sealed with glass glue or other appropriate methods to ensure that the interfaces do not enter. water;

7. Install and fix, do not use metal materials such as iron wire to tightly tie the lamp to prevent the wire from falling into the light bar, causing short circuit leakage and burning of the light bar;

8. If the light strip is damaged, please cut off the unit immediately and do not continue to use it to avoid danger.

9. This product is not a children’s toy, but it is easy to cause children’s interest. Please install it in a place that children can’t reach or under adult supervision. It is strictly forbidden to use this product directly in places where people such as swimming pools and rivers are in close contact to prevent safety accidents.